Email this article 
Experimental study of the properties of metamaterials based on PLA plastic when perforated by a rigid striker
- Authors: Ivanova S.Y.1, Osipenko K.Y.1, Banichuk N.V.1, Lisovenko D.S.1
-
Affiliations:
- Ishlinsky Institute for Problems in Mechanics RAS
- Issue: No 4 (2024)
- Pages: 207-214
- Section: Articles
- URL: https://jdigitaldiagnostics.com/1026-3519/article/view/673041
- DOI: https://doi.org/10.31857/S1026351924040146
- EDN: https://elibrary.ru/UCEOZU
- ID: 673041
Cite item
Open Access
Access granted
Abstract
The mechanical properties of metamaterials with different cellular internal structures were experimentally studied when perforated along the normal by a rigid spherical striker. Auxetic and non-auxetic samples of metamaterials with a chiral structure of cells, respectively, in the form of concave or convex hexagons, were produced using a 3D printer from e-PLA plastic. Based on the penetration experiments, the properties of chiral auxetic and non-auxetic samples of the same mass were compared for the cases when there was air inside the cells and when the cells were filled with gelatin. The relative loss of kinetic energy of the striker when perforating gelatin-filled samples was significantly higher for the auxetic metamaterial than for the non-auxetic one. For unfilled (“air”) samples, the relative loss of kinetic energy was slightly higher for the nonauxetic.
Full Text
About the authors
S. Yu. Ivanova
Ishlinsky Institute for Problems in Mechanics RAS
Email: lisovenk@ipmnet.ru
Russian Federation, Moscow
K. Yu. Osipenko
Ishlinsky Institute for Problems in Mechanics RAS
Email: lisovenk@ipmnet.ru
Russian Federation, Moscow
N. V. Banichuk
Ishlinsky Institute for Problems in Mechanics RAS
Email: lisovenk@ipmnet.ru
Russian Federation, Moscow
D. S. Lisovenko
Ishlinsky Institute for Problems in Mechanics RAS
Author for correspondence.
Email: lisovenk@ipmnet.ru
Russian Federation, Moscow
References
- Ivanova S.Yu., Osipenko K.Yu., Kuznetsov V.A., Solovyov N.G., Banichuk N.V., Lisovenko D.S. Experimental investigation of the properties of auxetic and non-auxetic metamaterials made of metal during penetration of rigid strikers // Mech. Solids. 2023. V. 58. № 2. P. 524–528. https://doi.org/10.3103/S0025654422601616
- Ivanova S.Yu., Osipenko K.Yu., Demin A.I., Banichuk N.V., Lisovenko D.S. Studying the properties of metamaterials with a negative Poisson’s ratio when punched by a rigid impactor // Mech. Solids. 2023. V. 58. № 5. P. 1536–1544. https://doi.org/10.3103/S0025654423600897
- Lim T.-C. Auxetic Materials and Structures. Singapore: Springer, 2015. http://doi.org/10.1007/978-981-287-275-3
- Kolken H.M.A., Zadpoor A.A. Auxetic Mechanical Metamaterials // RSC Adv. 2017. V. 7. № 9. P. 5111–5129. http://doi.org/10.1039/C6RA27333E
- Ren X., Das R., Tran P., et al. Auxetic Metamaterials and Structures: A Review // Smart Mater. Struct. 2018. V. 27. № 2. P. 023001. https://doi.org/10.1088/1361-665X/aaa61c
- Wu W., Hu W., Qian G. et al. Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review // Mater. Des. 2019. V. 180. P. 107950. https://doi.org/10.1016/j.matdes.2019.107950
- Gorodtsov V.A., Lisovenko D.S. Auxetics among materials with cubic anisotropy // Mech. Solids. 2020. V. 55. № 4. P. 461–474. https://doi.org/10.3103/S0025654420040044
- Shitikova M.V. Fractional operator viscoelastic models in dynamic problems of mechanics of solids: A Review // Mech. Solids. 2022. V. 57. № 1. P. 1–33. http://doi.org/10.3103/S0025654422010022
- Gao Y., Huang H. Energy absorption and gradient of hybrid honeycomb structure with negative Poisson’s ratio // Mech. Solids. 2022. V. 57. № 5. P. 1118–1133. http://.doi.org/10.3103/S0025654422050053
Supplementary files
